Minerva Bloggers Network - Red Vinyl Valentine

For this months Minerva bloggers project, I've been hanging out with these ladies:

Simplicity 8412, from 1969 - I think the condition would be described as 'well loved'.

I made the coat in this pattern once before in the 90's. That time I used a black plastic-y snake effect PVC. I remember it wasn't totally successful, probably because the fabric was too flimsy for the style. I think I turned it into a shorter zip up jacket, then who knows where it ended up!. At least I don't have it any longer.

And did I learn my lesson about unsuitable fabric? Of course not!I found myself being drawn to shiny plastic yet again, this time in the form of red PVC from Minerva. This is much heavier, a more suitable coat weight. In fact, it reminds me of the stuff you see on outdoor cafe tables - sturdy and weatherproof!

And is it shiny! Here it is in full effect, gleaming in the night:

I'd never sewn with this sort of material before and realised through a number of test swatches (and mistakes)that there are several things you can't do:

• no pinning - it leaves holes
• no ironing, unless you want a sticky mess
• no mistakes that involve unpicking - again, holes, etc
• you can't ease in larger pieces to smaller pieces - this fabric just doesn't like it, making sleeve heads a pain! But you can stretch a smaller piece to fit a larger piece, to some extent.

One of the many holding techniques I used! Sellotape was also employed.

This fabric tests all of your fabric handling powers. It was a bit like sewing a big, thick, unruly plastic bag, or a tyre inner tube. It sticks to itself when you don't want it to, and sticks to the presser foot. I found out too late that a walking foot was needed for this project, but as my machine is old and no equivalent is made today, it's hard to find the right one. Instead, I employed a low-tech solution for top stitching - tissue paper:

I laid it on top of the seam, sewed through all the layers, then tore it away. And I used a lot of tissue for this coat because there was a lot of top stitching. As is the way with old patterns, there's little in the way of advice on seam finishes. The nature of the fabric is such that seams don't lie naturally flat. Ironing is out of the question, so I trimmed one side of the seam away on the wrong side, folded the other side over flat, and stitched through all the layers, using a top stitching thread.

I also stitched down the darts at the back neck and on the sleeve:

Close up of neck darts

Other than the hem, I didn't finish the seams at all because the fabric doesn't fray one bit!

Inside of the coat - no overlocking, pinking, zig zagging, etc, because there was just no need

I did finish the hem with some lovely satin bias tape for no other reason than it looked nice.

Coat hem

Because the coat is essentially a big plastic bag and therefore was going to be a bit - ahem - sweaty, lining was out of the question. For added 'ventilation', I made a sort of cotton dress shield (kids, ask your grannies...) from some scraps:

I attached this with the sleeve seam to the inside of the body of the coat, then applied 2 eyelets through all layers under each arm:

Eyelets inside...

...and on the outside

With no ironing allowed, that meant no interfacing. But I wanted to add some body and weight to the collar and front facings. Solution: a layer of lining inside the front facings, neck facings, and collar:

Inside the front facing

For the moment, I haven't used any closures because basically I can't decide what to use. Until I do, the belt will suffice:

I really, REALLY wanted to get some photos of the coat in the rain, but it's been pretty dry here in London recently. But for the sake of research, I found a way to test it's properties and can confirm they are up to standard:

And it was a complete fluke that this coincided with Valentines!

See you soon!